This E-SDS HDMI Network Extender converts HDMI signals to standard TCP/IP and transmits as long as 60 meters on a single cable connection over single CAT6/6a/7 Ethernet Cable. Supports 1080P, 3D, HD Audio, Deep Color and supports 20~60KHz wide frequency IR remote control.
PLEASE NOTE: This device does NOT WORK with CAT5e and must be used with CAT6/6a/7.
Cable length auto adjustment: Automatically adjusts for different cable lengths from 1-60 meters to deliver the best quality display. Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality.
Pure Hardware Transmission: It is pure hardware design. With the IR Extension Function, you can use the signal source remote to control the source device at the receiver. Use standard HDMI Cable and Ethernet Cable.
1. Sender and receiver must work at the same time. Use only high quality CAT6, CAT6a or CAT7 cable with this HDMI extender.
2. Make sure that HDMI to RJ45 sender and RJ45 to HDMI receiver are not mixed up before installation.
3. Do not connect devices while they are working.
4. If not using factory power adapters, ensure that you are using DC5V power supply only.
low resistance and consumption oxygen-free copper core (CAT6, CAT6A, CAT7)
Transmit length more than 60M/180FT by CAT6 cable or higher.
IR remote control:
This is our new HDMI network extender that converts HDMI signals to standard TCP/IP and supports transmission over CAT6, CAT6A, and CAT7 up to 180 feet. Please note that this unit does not work with CAT5E.