|
Our POE-4 is an 8 port switch with 4 Power Over Ethernet ports that has enough power to power our POE compatible cameras in each of the 4 ports. If you need to power more than 4 POE cameras, you can use additional POE-4 switches. Each POE port provide up to 15.4 Watts of power and the total combined power supported is 53 Watts for all four ports. The POE protocol is a match to the protocol of our cameras. There are a total of 8 10/100M ports. Included with these units is our outstanding lifetime technical support to help you get your system up and running.
| POE-4 Specifications |
| Power: |
Supports PoE power up to 15.4W for each PoE port Supports PoE power up to 53W for all PoE ports |
| Standards and Protocols: |
IEEE802.3, 802.3u, 802.3x, 802.3af, CSMA/CD |
| TCP/IP Ports: |
8x 10/100M Auto-Negotiation RJ45 ports with 4 PoE ports (port-1~port-4), Auto MDI/MDIX |
| Basic Function: |
Compatible with IEEE 802.3af compliant PDs Port Priority Function Wire-speed Performance MAC Address Auto-Learning and Auto-aging IEEE802 |
| 100BASE-TX: |
UTP category 5, 5e cable(maximum 100m) EIA/TIA-568 100? STP (maximum 100m) LED Indicator: Power, Link/Act, 100Mbps, PoE Status,PoE MAX, 3x flow control for Full-Duplex Mode and backpressure for Half-Duplex Mode |
| Backbound Bandwidth: |
1.6Gbps MAC Address Table: 1k Forwarding Rate: 10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port |
| Safety & Emission: |
FCC, CE Power: External Power Adapter |
| Transmission Method: |
Store-and-Forward Network Media: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100?? STP (maximum 100m) |
|
