Archive for the ‘ HowTo Videos’ Category



Connecting a Plug and Play Cable to your DVR

Written By:
Thursday, August 6th, 2009
This video demonstrates how to connect the cable to the DVR.

After connecting your cameras to one end of the plug and play cable, the other end will connect to its respective channel on the DVR. The connection is the same as the connection you made at the camera.

facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

Connecting a Plug and Play Cable to a Box Camera

Written By:
Thursday, August 6th, 2009
This video demonstrates how to make the connection from the camera to the plug and play cable.

When you are using plug and play cables to connect your cameras to your DVR, the ends of the cable are already pre-made. Making the connection is easy, and it is hard to make a mistake here. All our cameras have a similar connection.

facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

Install a Box Camera in an Outdoor Housing

Written By:
Thursday, August 6th, 2009
This video demonstrates how to install a box camera into an outdoor housing.

When a box camera is mounted outdoors, an outdoor housing must be used. The box camera will be mounted inside the housing and all cabling will be routed out of the housing through the provided cabling ports.

facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

Install an Outdoor Camera Housing

Written By:
Thursday, August 6th, 2009
This video demonstrates how to properly mount an outdoor housing.

When using box type surveillance cameras outdoors, it is necessary to install them inside a weatherproof housing. Some weatherproof housings are equipped with heaters to protect the camera from extreme cold environments.

facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

Mount a Box Camera

Written By:
Thursday, August 6th, 2009
This video demonstrates the mounting of a camera indoors.A standard box camera can be mounted in many various ways. For indoor use, the camera can be mounted on a wall or on the ceiling, and the mount can be attached to either the top or the bottom of the camera so that any camera view can be achieved. When used outdoors, the camera must be installed in a weatherproof housing.
facebooktwittergoogle_plusredditpinterestlinkedintumblrmail