How to Set Up EVP Event Notifications
CCTV Articles

How To Set Up EVP Event Notifications

In this tutorial, we’re going to cover how to set up EVP event notifications on iOS and Android. 

To be successful, you’ll have to have already set EVP up on your phone.

If you’re interested in purchasing any security cameras, video recorders, and more, visit our online security camera store. If you need further technical or sales assistance, please contact Security Camera King.

How to Set Up EVP Event Notifications

When the app first starts, it will likely place you on the live view.

From here you will need to tap the home icon in the upper left corner of the screen.

On the home page, go to the bottom of the screen and tap the Message tab.

When we get to the message page, you’ll see no entries listed as we have not yet subscribed a recorder to do.

Tap the bell in the left-hand corner. You may have to agree to a small privacy statement if you have not been to this page before.

Tap the radio button and tap OK. You’ll notice that our AI recorder we have listed in our phone is closed as we have not yet subscribed.

Tap to get to the next screen and then enable the slide bar on the far right.

After enabling the bar you’ll see a list of options appear. The most common notification types are IVS and motion detection.

We’re going to start by enabling those so click Motion Detect. From this page, tap Motion Detection. You can enable all of your cameras using the radio button at the top but we’re going to be just selecting our IP PTZ.

When done, tap back and then tap back again to get to the list of notification types. We’re going to choose IVS here and then we’re also going to be working with Cross Line.

First tap that. Then we’re going to enable our first camera. Tap back. We’re also going into Cross Region and we’re going to enable that as well.

Tap back until you get back to the notifications screen. When you’re done setting all your notifications options and you can check and see the numbers of types, save here.

Click the Save icon in the top right-hand corner.

That’s all you need to do to have your notification set!

 

Before we leave you today, we do want to take a look and see what it would look like if there is a notification that goes off so we’re going to take a look at the live view and watch our IP PTZ as we actually cross through one of our IVS rules.

Take a look and you’ll see me come in from the right side of the frame. This should trigger an IVS tripwire notification as soon as I cross the white line, causing the notification to appear phone.

 

Thank you for following along with our tutorial on how to set up EVP event notifications. If you need further assistance, please contact Security Camera King.

Facebook | Twitter | YouTube

How to Set Up EVP Event Notifications

Related Posts