June 9, 2014
Hi, I have a Two Cameras model #OB-LX650IR50. I’m running a 16 channel Elite system with 14 Cameras and a Power Supply Model W-12VCD-18p/10A. The system is about 3 years old and has been working fine until 2 days ago I notices that two camera InfraRed were out. They work fine when the lights are on but it seems like something went out.
What do you this is the problem? a Defect, Bulbs need to be changed???
I would power the cameras off and on see if the IRs come on If not check to see if any of the LEDs are darker color than clear. If so they are done. If they dont come back after power cycle there are a couple options depending on your skill level. As the cameras are out of warranty you may now open them with out voiding warranty. Check to see if IR board is getting power. If it is not you would need to get external illumination. Should you have the tools you could replace the IRLEDs if found bad.
Most Users Ever Online: 138
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 100
West Coast Jones: 66
Guest Posters: 115
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Casey Sardoss, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Thomas Dapra