March 18, 2016
I currently have 1 tridvr-pre32c and I have several cameras monitoring 3 different buildings, the other day I had a tractor trailer come through and ripped down the lines between 2 of the buildings, I was wondering if there was a way I could just purchase another of the same dvr unit and connect it to the main unit. I was wondering if this was possible so I can avoid having to run 11 camera wires again to the 2nd building, so I can control both dvr’s with one monitor and mouse.
Thanks for the help
January 15, 2014
I would think the best way you could do this is all over the network using the Prime CMS software to control these systems from your PC. If you do that you could use something like this (LINK) to link the two buildings to be on the same network. At least for the camera stuff…
Let me know if you have any further questions. Thank you.
Most Users Ever Online: 138
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 100
West Coast Jones: 66
Guest Posters: 114
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Casey Sardoss, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Thomas Dapra