October 30, 2014
I am trying to set my DVR Ultimate mini to only record when motion is detected on a channel. For MD to work the unit has to be set to manual so it records all of the time. Is there a way to set it to where it only records when a MD event occurs? I don’t want it to be recording all of the time just when a MD is tripped.
First go to the record page and set the camera Channels you want to record on to schedule and the ones you don’t to stop remember to click save.
If you want to record motion then you would only select MD in the schedule page and select all days and save you can copy to all channels or set each camera individually then go to events then detect there you will enable motion and set the sensitivity of the motion recording. Hope this help have a great weekend.
heres a great article on the set up.
Most Users Ever Online: 233
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Heath Phillips: 261
Guest Posters: 128
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Damon Delcoro_1, Tony Petruzzi
Moderators: Zeke Richey, Eric Wilson, Yarden Pinhasi, Aldino Frassinelli, Joe Shopsin, Joe Reffit, jwilhelmi, Jorge Nava, Tyler Rittel