I have the “ Elite 8 Channel DVR 1U 4K Pentabrid HD over Coaxial & IP” I already have the “ Elite 25X 2MP HDCVI Infrared PTZ Security Camera [#CVIPTZ-EL2IRL25X-D2] ” PTZ for a while and it works great. I just bought the “Alliance 1080p HD-TVI, CVI, AHD, Analog 2MP Mini 18X PTZ Security Camera” and I can not get it to work properly. I had this set to cvi which is what I am using on my dvr. It looks to be set al address 001 and baud of 2400. This will zoom and pan just fine but will not tilt up or down. ALso I can not get the osd to pop up on the screen. I click enter menu from the ptz box and nothing shows on the monitor like my other ptz camera?
The address refers to the Serial connection if you use this, since you are using COC these settings/parameters are not used. A troubleshooting step that you should look into is to move the camera from all directions one by one and see how fluid the movement is as well as hear the motor for this of course you will have to be close to the camera.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: firstname.lastname@example.org
Most Users Ever Online: 233
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Heath Phillips: 261
Guest Posters: 128
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Damon Delcoro_1, Tony Petruzzi
Moderators: Zeke Richey, Eric Wilson, Yarden Pinhasi, Aldino Frassinelli, Joe Shopsin, Joe Reffit, jwilhelmi, Jorge Nava, Tyler Rittel