April 7, 2015
Stupid question but I cannot find an installation manual in PDF anywhere on this site. The motorized dome I have (model listed above) has two extra very small gauge wires that I assume are the power to remotely re-focus the camera. But where do they connect? Do I just terminate them with the power that I have running to the camera?
You have a CVI camera, there is only two cables coming off the camera that make up the pigtail. It is the RG-59 connection for video and a power lead! You should power the camera using 12v and connect video and with CVI there is no need for RS-485 or any kind of communication connection! Can you take a picture of the wires you are speaking about so I have a better understanding of what you need? Thank You!
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: email@example.com
Most Users Ever Online: 233
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Heath Phillips: 261
Guest Posters: 129
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Damon Delcoro_1, Tony Petruzzi
Moderators: Zeke Richey, Eric Wilson, Yarden Pinhasi, Aldino Frassinelli, Joe Shopsin, Joe Reffit, jwilhelmi, Jorge Nava, Tyler Rittel