September 15, 2015
I replaced 3 CVI cameras after a storm and power outage. I installed three new CVIOB-TP2IR2812B.
The cameras are nice and clear but in black and white. DVr’s have been tested and they are working with color at the dvr using a spare camera.
The cameras are set up in the OSD like the others I have.
Could the coax to these cameras go bad after a storm and power outage??
Thanks in advance
In the camera you need to access the OSD and find the option that says reset or default camera. Try that and see what it does. I want to say the auto white balance may also be the issue. Find that option and cycle through the settings in that feature to see if color comes back too after reset.
Most Users Ever Online: 132
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 98
West Coast Jones: 66
Guest Posters: 77
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Ben Degraw