Avatar
Please consider registering
Guest
Search
Forum Scope


Match



Forum Options



Minimum search word length is 3 characters - maximum search word length is 84 characters
Register Lost password?
sp_Feed sp_TopicIcon
How to view a single TP series camera remotely
sp_NewTopic Add Topic
Avatar
Gilberto
Member
Members
Forum Posts: 150
Member Since:
June 4, 2014
sp_UserOfflineSmall Offline
1
September 28, 2014 - 9:39 am
sp_Permalink sp_Print sp_EditHistory sp_QuotePost
sp_ReportPost

Our TP series cameras are wonderful high resolution little video machines, sometimes you need to access the cameras outside the network for fine adjustments using your external IP address well here's how to do it. If the TP cameras port settings are set to default you can port foward 80 and 3001 pointing to the IP address of the camera, you may need to change the web port because most routers use port 80 as default so if you change the web port to say 88 then that's the port to forward. Remember if cameras are on an NVR with built in POE you will have to acces the cameras locally. Remember this set up will only use Internet explorer 32bit for remote view. Here's the set up 

https://www.securitycameraking.....#038;ind=4

Sample TP 

https://www.securitycameraking.....-prd1.html

Forum Timezone: America/New_York
Most Users Ever Online: 727
Currently Online:
Guest(s) 21
Currently Browsing this Page:
1 Guest(s)
Top Posters:
Techpro Security: 404
shockwave199: 179
tubac: 167
Jer7of9: 155
Gilberto: 150
MrDeepFreeze: 136
Night Hawk: 100
Mark: 89
West Coast Jones: 66
ShawnInFL: 64
Newest Members:
LouiePlery
CharlesteTef
HenryBunny
RaymondSmere
MasonRogy
proelectech
KnightGlobal
RobertSnany
ButUricy
chrisoco
Forum Stats:
Groups: 5
Forums: 28
Topics: 1497
Posts: 5994

 

Member Stats:
Guest Posters: 142
Members: 22954
Moderators: 7
Admins: 5
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Damon Delcoro, Tony Petruzzi
Moderators: Zeke Richey, Eric Wilson, Yarden Pinhasi, Joe Shopsin, jwilhelmi, Jorge Nava, Tyler Rittel