January 27, 2018
So the date and time are wrong on my two Sibell IP Cameras. Off by 1 hour. My NVR is showing the correct date and time. What is the best practice regarding date and time on the actual cameras? How do I change the date and time on my two cameras? Should they sync with NVR? Should date and time on camera’s be on or off?
I did not find a way to actually configure the date and time on the camera’s themselves via the Sibell NVR.
January 15, 2014
If you have Sibell IPC’s paired with a Sibell NVR then the cameras should sync their time with the NVR. If that is not happening then I would recommend looking for a firmware update on the IPC’s and the NVR.
Send an email to firstname.lastname@example.org including your order information and the system information for both cameras and the NVR. From there we can provide you with updates and instructions on upgrading the system.
Most Users Ever Online: 138
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 100
West Coast Jones: 66
Guest Posters: 110
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Thomas Dapra