July 16, 2016
I have set up 12 of the IPID-TP2MP50L2812-W and 11 of them are focused perfectly. The last one appears to be focused for something very close to the camera. Like when I was pulling the dome off of it that was the only time a picture from it appeared to be in focus. Is there a way to repair the focus of this dome camera.
Thanks for your help.
Open the lens cover next to the lens there is two knobs one is for focus and the other is zoom. Adjust these to the correct settings according to the cameras location.
Note: adjustment is finger tight do not use tools for this.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: email@example.com
Most Users Ever Online: 138
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 100
West Coast Jones: 66
Guest Posters: 120
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Casey Sardoss, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Thomas Dapra