March 13, 2017
I am mounting 8 of the HDOB-AL5IRZ cameras on the side of a metal building. I noticed that the IR LED’s are reflecting off the building and washing out the camera’s view. Any tricks to stop this type of flash back from the IR’s and building?
Also some of the cameras point toward each other and the IR’s from the opposite camera seems to be producing a large white spot on the the opposing cameras view. Any ideas to minimize this? The cameras are on each corner of the building and face toward the middle.
April 13, 2015
When dealing with an issue like this you would ant to adjust the cameras as much as possible to eliminate the issue naturally but there are also settings in the camera OSD such as Smart IR that will help with this.
Please open up a support ticket with us at http://www.securitycameraking.com and we can help you with this.
Most Users Ever Online: 233
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Heath Phillips: 261
Guest Posters: 127
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Damon Delcoro_1, Tony Petruzzi
Moderators: Zeke Richey, Casey Sardoss, Eric Wilson, Yarden Pinhasi, Aldino Frassinelli, Joe Shopsin, Joe Reffit, jwilhelmi