Register
Log In
Home
Add Reply
Add Topic
February 11, 2015
Offline
Hi guys/Gals
I just purchased the 16 Channel Hybrid Federal Series dvr. Im trying to add a Panasonic camera Model#bb-hcm511 with no luck. I also have a Panasonic wv-sw598 that works just fine on the system. I used the same method as working one just changed ip address and port #.
1. Manual add
2. channel 18
3.panasonic make
4. ip address 192.168.1.115
5.rtsp port 80 http port 5001
6. username
7.password
8.remote channel 2
9. decoder buffer 280 ms
10. auto
The camera is definitely working locally from web browser http://192.168.1.115:5001
username and password are correct. any suggestions would be greatly appreciated
TIA
I am sorry, but I only know the settings for our cameras. The manufacturer of the camera should know what settings to use or if it is compatible. Our EL series are set to private and port 37777, and our TP series are set to Onvif and port 8080. Good Luck!
1 Guest(s)
