May 19, 2013
Blue screen of death again on maintenance Tuesday morning at 2 am. I knew what to do. Reformat HDD reboot and plug in cams one at a time. At least I made it two whole weeks this time.
One, is there a new firmware for my NVR-ELM-8-POE-8-D
System Version 3.200.0000.3
8ch 4 alarm in 2 alarm out
Two, I have one 6TB HDD in there, new from SCK. The NVR is rated 8TB total with two sata connections. Is it possible it’s looking for 2 4TB HDD to equal 8TB and not one 6TB ??? Meaning any HDD over 4TB will make the NVR fail.
The video is stunning and everyone is shocked at the quality….when it runs.
Boo hoo for me.
There is a firmware update for your unit. https://app.box.com/s/mot4fu6f582424tbfp2zmadsk55re6pz
Please please make sure you use the config tool to push this firmware to this NVR, DO NOT use the web interface of the NVR. You can get the tool here… https://www.securitycameraking.com/securityinfo/downloads/?wpdmdl=61&ind=0
Push that firmware and then you can change the auto maintain to anytime you want and then change the time of the NVR to a minute or two before the auto maintain. This way you do not have to wait a week to test this. I will continue to test this here to check ab out the hard drive. Thanks.
May 19, 2013
Most Users Ever Online: 233
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Heath Phillips: 261
Guest Posters: 128
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Damon Delcoro_1, Tony Petruzzi
Moderators: Zeke Richey, Eric Wilson, Yarden Pinhasi, Aldino Frassinelli, Joe Shopsin, Joe Reffit, jwilhelmi, Jorge Nava, Tyler Rittel