June 20, 2014
I had a lorex mc6945 ripped off its wall mount,wires torn.
My problem is now i have 5 wires exposed and no clue to fix
I have 2 red,2 black and 1 yellow.
Im guessing..yellow for vid,1 red for power ,2grnd wires,1 for the vid an
1for the power/ ..pos + / neg -….
Probliem is i’m only guessing an dont want to short it out …
The power is the only part you would damage something. You will need a multi-meter to test for power. the red and black are most likely positive and negative. If those cables are PNP and they ripped the ends off they will need to be replaced. You can’t crimp new connectors on the cable type. If you have coax you can.
June 20, 2014
Thanks Danial,what i didnt mention was that where the wires were
Torn apart,wires atached to the cam are all i have to work with
The wires/adjoining ends disapeared into the wall and i have no access
.aside from that ,i dont know what kind of ends they had.i have 5 thin wires from the cam.how do i get around this
This is what I found online.
Dan will help you with any questions.
Try the following link
Example of a 6-Pin DIN Connection and Pin-out:
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: email@example.com
Most Users Ever Online: 132
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 98
West Coast Jones: 66
Guest Posters: 77
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Ben Degraw