if I use an NVR with poe ip cams and I want to eliminate wiring to 2 of the cams on 2 unattached but adjacent outbuildings…how would I do this wirelessly? do I add some kind of transmitter reciever for rj45 and poe power injectors for each cam ….. Or some sort of Wi-Fi hub solution?
cables between buildings won’t due and while underground is possible I’d have to go under sidewalks and would rather not dig.
any suggestion welcomed. Tia
January 15, 2014
If I am understanding correctly you could use a pair of these (LINK) to create a wireless bridge between both buildings. You would simply connect the Access Point to the main network of the first building and then connect the station to a POE switch on the second building and plug the cameras into that POE switch. This wireless bridge will transmit network between the two antennas and ultimately give network to the POE switch in the second building.
Keep in mind with this solution the two antennas have to be within complete line of sight of each other.
Here is a configuration article (LINK)
Most Users Ever Online: 138
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 100
West Coast Jones: 66
Guest Posters: 115
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Casey Sardoss, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Thomas Dapra