March 8, 2014
I am in the middle of purchasing this
house. It would be my first house and I am curious to know what system, camera, wiring, power supply you recommend. In the attached I have listed where I would like cameras to be located and how i would run the wires. I am curious to know which type of wire, connectors and the likes, and which cameras i should use. these will be located outside.
I greatly appreciate your help and thank you very much.
I know the drawing isnt the best But I only have paint on my computer to edit photos.
January 3, 2014
Everything really depends on the resolution you are looking to get as well as the budget you have for this project. I would recommend not to run any Siamese cable into your Power Distribution Box as any high voltage lines will interfere with the signal. You can always have a Low Voltage Dist. box inside and just simply use a pvc elbow that will allow you to pull the lines as well as make any terminations if you need to.
Jose Malave - Sales Rep. | Toll Free: 866-573-8878 x116 | E-mail: email@example.com
Most Users Ever Online: 41
Currently Browsing this Page:
Daniel Ross: 287
Night Hawk: 74
West Coast Jones: 29
Guest Posters: 4
Newest Members: zillah, marawax, Quasar, montrikdg, watcher, Kevin, tbg1500, lwulfeck, clockhart3216, andrew bell
Moderators: Ryan Newkirk: 52, Jesus Ragusa: 367, Zeke Richey: 32, Gilberto: 150, Jose Malave: 261, Heath Phillips: 17, javajeff: 41, mrkuchuk: 25
Administrators: Security Camera King: 9, Damon Delcoro: 9, Brad Besner: 201, Dro Simoes: 39, Ian Bailes: 7