1x BALUN-P (comes in pairs)
1x RCA-M-BNC-F (comes in single units)
1. Identify the conductors ( Red = Audio Out , White=Audio IN , Black = Audio GND)
2. Connect the GND to the (-) of the Balun P and the (+)
3. Add the RCA Adapter to the Balun
Then attach the MIC to the RCA side and power the mic.
Move to the IPPTZ’s Web UI and go to Encode, ensure that the Audio is enabled. You should now hear audio. For remote viewing from a phone ensure that the substreams audio are enabled within the same menu.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: email@example.com
May 8, 2017
I might be needing these as well for my dome camera setup. Still finding a decent store that has everything.
We sell the hardware necessary on http://www.securitycameraking.com. Your also welcome to call and speak to any one of our sales experts if you have any pre sales questions. They can be reached at (866) 573-8878 Ext 2
Most Users Ever Online: 233
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Heath Phillips: 261
Guest Posters: 128
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Damon Delcoro_1, Tony Petruzzi
Moderators: Zeke Richey, Eric Wilson, Yarden Pinhasi, Aldino Frassinelli, Joe Shopsin, Joe Reffit, jwilhelmi, Jorge Nava, Tyler Rittel