March 5, 2018
I am trying to add this camera to my zoneminder system but cannot find an appropriate setup documented anywhere. I am wondering if anyone has configured it to work in Zoneminder. Among the parameters are Remote Host Path (for mpeg) or RTSV configs. It would be good to know the different paths associated with the main and sub-streams. Any guidance would be appreciated! I really like this camera and it would be a very cost-effective solution through our school campus if I can get it working on this system.
Please try the RTSP method for connection.
username = admin (default)
password = admin (default)
ip = ip of the camera
port = onvif port 554 (default)
ChannelNo = channel 1 for camera
typeNo = 0 for Main Stream, 1 for Sub Stream
authentication = Basic64
If the camera is not using the default username and password be sure to encode your credentials.
admin:admin = YWRtaW46YWRtaW4NCg==
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: firstname.lastname@example.org
Most Users Ever Online: 132
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 100
West Coast Jones: 66
Guest Posters: 82
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Ben Degraw