Register
Log In
Home
Add Reply
Add Topic
April 6, 2017
Offline
Hello,
I recently purchased the IPVD-EL4IR28A and IPOD-SB4IR28 IP cameras. I want to add their live streams into my home automation control but need to have url for the jpeg/snapshot to add them to the system. I'm not sure what they are or how to get them. The direct wording in my automation system is:
"You are no longer required to fill in the IP address just paste the full URL which returns a JPG file/snapshot in the box below. Example: http://192.168.8.200/snapshot.cgi"
Any help would greatly be appreciated.
See Answer
January 3, 2014
Offline
Elite System See Forum post https://www.securitycameraking.....on-webpage
Sibell System See Forum Post https://www.securitycameraking.....tsnapshot/
You can find good information in our Forum and Article Section as well as our Video Vault.
Answers Post
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
Calculate your Hard Disk Drive Here | Calculate your Lens Here | Calculate your Voltage Drop Here
Video Vault (All Videos) | Security Camera Videos | Smartphone Access Videos
April 6, 2017
Offline
Thank you Jose for the fast reply. I'm very confused with the instructions in those post. It look like they are trying to get a snapshot form a NVR. I don't have them hooked to a recorder. I need to get them directly from the camera.
For instance if I have the Sibelll camera set as 192.168.1.31
and the Elite camera set as 192.168.1.32
What would I have to do to the the snapshot url directly from the camera.
Thank you again for your help.
January 3, 2014
Offline
It is the same string, same request. Use Channel1 for the camera.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
Calculate your Hard Disk Drive Here | Calculate your Lens Here | Calculate your Voltage Drop Here
Video Vault (All Videos) | Security Camera Videos | Smartphone Access Videos
April 6, 2017
Offline
I cannot get it to work. For the elite I'm entering:
http://192.168.1.32/CGI-bin/snapshot.cgi?[channel=1]
and for the Sibell I'm using: http://192.168.1.31%5B554:port%5D/GetSnapshot{/channel1]
I cannot get it to return an image to me.
January 3, 2014
Offline
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
Calculate your Hard Disk Drive Here | Calculate your Lens Here | Calculate your Voltage Drop Here
Video Vault (All Videos) | Security Camera Videos | Smartphone Access Videos
April 6, 2017
Offline
The snapshots worked, thank you for the support Jose. The Sibelll Camera added to my system with no problem the elite will not add. It is asking me for a user name an password. I think that is an issue with the automation system.
January 3, 2014
Offline
try removing the authentication on the string and see if your automation system allows for manual input.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
Calculate your Hard Disk Drive Here | Calculate your Lens Here | Calculate your Voltage Drop Here
Video Vault (All Videos) | Security Camera Videos | Smartphone Access Videos
1 Guest(s)
