Security Camera King Support Forums

Please consider registering
Guest

Home Security Camera Support Forum IP Network Security Cameras Ports assigned to IP Cams by NVR?

Ports assigned to IP Cams by NVR?

Add Reply

Add Topic

Jer7of9

Member

Members

Forum Posts: 154

Member Since:
May 19, 2013

Offline

January 20, 2015 - 4:25 pm

Are the ports for each IP Cam supposed to be different? I have two El3mpir50 ports 37777 and 47777 on NVr Elm 8 poe 8dh. The ip address for the NVR uses 47777. But as i add a 3rd and 4th camera are the ports assigned by NVR or do I set that up in the camera with the config tool before I hook it up to the DVR?

If the ports for each ip cam have to be different then I have to port forward each one, correct?

I can do all that but just don't want to do trial and error anymore than I have to.

Thanks

Techpro Security

Member

Members

Forum Posts: 404

Member Since:
March 27, 2013

Offline

January 20, 2015 - 4:40 pm

If your plan is to view each camera individually from the internet then Yes, if you just access the NVR instead then no. It is not recommended to port forward every camera, that will be a big overhead in your router.