Register
Log In
Home
Add Reply
Add Topic
I have a current hybrid DVR purchased here back in 2015, HYBDVR-FE016480-DH-160. The system has been great however, we are looking to add 8-10 more IP cameras and are considering the addition of a new NVR for these cameras. Is is possible for these two systems to communicate to each other so that when accessing remote or otherwise, there is a seamless interface?
Hi Dean,
You can use any of our ELITE series NVRS in collaboration with your current HYBDVR. Then remotely you can run our SmartPSS program and watch both systems at the same time. Also you will be able to see both from your mobile app as well.
Hi Dean,
You're more than welcome. As far as if they will communicate with one another, yes they can but I would not recommend streaming the HYBDVR to the NVR. The best thing you can do is allow them to both operate on your network and watch them in SmartPSS simultaneously, or watch them in your browser.
Yes, as long as they are on the same network you can certainly open DIFFERENT ports to the machines and watch both of them with the same WAN address just using the corresponding port.
If you want to use the web interface you can. On the LAN each DVR will have its own IP, then on the WAN you will use the same WAN address (as long as the DVR and NVR are on same LAN) just have to specify the correct port.
1 Guest(s)
