Register
Log In
Home
Add Reply
Add Topic
November 14, 2014
Offline
When I have the 12X-Mini-I camera reboot, it switches from GMT-5 time zone to GMT+8 since the NVR-ELT-4 was added to the network. If I shut the NVR down, a reboot of the camera is OK.
January 3, 2014
Offline
Please ensure that both the camera and the NVR have the correct settings. If you are changing these setting smanually turn off the NTP server found in the Network tab.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
Calculate your Hard Disk Drive Here | Calculate your Lens Here | Calculate your Voltage Drop Here
Video Vault (All Videos) | Security Camera Videos | Smartphone Access Videos
November 14, 2014
Offline
The NTP (with Date-Time under General with web interface) is unchecked. I have also unchecked DST also.
About 15 to 30 seconds after reboot the time on the camera picture switches from Eastern (GMT-5) to GMT+8.
January 3, 2014
Offline
When manually changing the time the GMT settings are not used as the DST and the NTP settings are disabled.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
Calculate your Hard Disk Drive Here | Calculate your Lens Here | Calculate your Voltage Drop Here
Video Vault (All Videos) | Security Camera Videos | Smartphone Access Videos
November 14, 2014
Offline
Then what is causing the NVR to cause the camera to change Time and Time Zone shortly after reboot?
January 3, 2014
Offline
If this camera is connected to an NVR you must match the manual settings on both the IP camera and the NVR's settings. As the NVR may change the cameras values.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: support@securitycameraking.com
Calculate your Hard Disk Drive Here | Calculate your Lens Here | Calculate your Voltage Drop Here
Video Vault (All Videos) | Security Camera Videos | Smartphone Access Videos
1 Guest(s)
