February 11, 2014
I have purchased a new NVR that that 16 ports with PoE
When I plug in my Mobotix M12 cameras they don’t power up, but if I plug them into a network PoE switch they power up.
Can someone help me? I purchased the PoE NVR so I could do away with having a separate PoE switch.
I have a couple of other cameras that power up when I plug them into the PoE NVR, but the Mobotix ones don’t.
Thanks in adavance for your help.
Try to manually add the cameras by the remote device feature. You will have to know the ip address to enter it in. The NVRs do not always detect other manufactures cameras. The cameras need to be set to onvif protocol and the NVR needs that set as well per each ip of the cameras. Alos before I would even try getting them to work in POE of NVR change them to onvif.
May 4, 2013
Maybe the built in POE just doesn’t supply enough power for those cameras. You’d have to know the power spec of the built in poe, and the power requirements of the mobotix cameras. Just a thought on my part.
Most Users Ever Online: 138
Currently Online: Jose Malave
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 100
West Coast Jones: 66
Guest Posters: 106
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Thomas Dapra