September 29, 2014
I am trying to set up a system that will have up to 16 poe ip HD cameras that can be viewed from a central point in the building (Security Station). I currently own a Netgear fs728tp POE Switch that I want to use with the new system once I figure this all out. My beginning questions are as follows:
1) I am looking at the 16 Channel Elite Compact Series – 1.5 U Network Video Recorder
Welcome to our forum!
To answer your questions , the PoE switch that you currently have will power the cameras of course the cameras need to be PoE enabled, 98% of our Network cameras are .
If you are looking to display the cameras in multiple Monitors what i suggest is running our PSS software or the Smart PSS software and connect your recording device to this. This will allow you to utilize multiple monitors of course the PC/Mac will need to have additional video cards or a video card that will output out to two monitors .
PSS software can be found in our Downloads Section
Feel free to give us a call if you have any questions we are more than welcome to assist you with your project.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: firstname.lastname@example.org
Most Users Ever Online: 132
Currently Online: Jose Malave
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 100
West Coast Jones: 66
Guest Posters: 82
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Ben Degraw