How to apply 12VDC power to your Sibell DVR

The first thing you need to do, after unboxing the unit of course, is power the DVR up using the power supply that came with the unit.

Inside the accessory box that is included with your DVR, you will find the proper 12VDC adapter. Plug this adapter into an outlet, and apply the DC plug to the recorder itself (see image below), you should immediately begin to see signs of power up.

Please take note of the following

If you’re recorder has a switch, make sure the switch is OFF when plugging in the DC plug, and then switch it to the ON position to power up the unit after the plug has been applied. After that you should begin to see lights operate on the front panel, you may even be able to hear fans running depending on the unit you have.