June 23, 2015
Hello Friends, am Affolly from Nigeria. Thanks for the opportunity.
IP Camera Using Wireless Radio to Transmit Video Signal to a Base Station (Point to Multipoint)
Please I need your advise I have been working on a IP surveillance of over 1to 2 kilometeres distance. I used EnGenius Radio and Point (ens202) and multipoint (ENH2100).I use H.264 IP Camera from AVtech. At the end of all installation with videos from the camera keep reloading at time it will continue at time it will remain for longer period of time. Please advice me on what to do.
Has anybody carried out this type of project and what are the equipment and material used to accomplish the project.
Please take a look at this article here :
It may serve as a guide for this setup.
Jose Malave - IT Director| Toll Free: 866-573-8878 | E-mail: firstname.lastname@example.org
Most Users Ever Online: 138
Currently Browsing this Page:
Dan Maresca: 460
Techpro Security: 404
Night Hawk: 100
West Coast Jones: 66
Guest Posters: 115
Administrators: Damon Delcoro, Brad Besner, Jose Malave, Gabe Garcia
Moderators: Ryan, Zeke Richey, Casey Sardoss, Jorge Nava, Heath Phillips, Brian Lee, Eric Wilson, Michael, Tonya Haley, LittleBrad, Ted, Matthew Ernst, Ariel Millard, Thomas Dapra