This is a 24 Channel POE Plus Switch. This can provide power to up to 24 POE IP cameras as well as to IP cameras that require POE plus. As of now, we have 3 IP 12X PTZ cameras that can use POE plus instead of 24V AC. So, instead of getting a separate POE injector you can now connect those to this switch. You can find those specific cameras in the related products section below.
This 24 Port POE Plus Switch also has 2 ports for Gigabit Uplink to your network that you have the NVR connected to. You have your choice of using either Ethernet Cable or Fiber Optic Cable. If you choose to use fiber, you will need an adapter port (not included). This switch is easy to install and is also rack-mountable.
Included is the power cord, mounts for the rack, a 1 year warranty and free tech support.
IEEE802.3x Flow Control
IEEE802.3af/at Power Over Ethemet
15.4 per port (IEEE802.3af / 30W per port (IEEE802.3at)
Wiring: Data provided over pairs over 1/2 and 3/6
Cable: Unshielded UPT cat.5 or higher
Half-duplex back pressure and IEEE802.3x full-duplex flow control